CH-120 Audio System
NO. | Description | Model | Argument |
1 | Single 12 "linear speaker | CH-120 |
◆ Driver: 1x 12" low frequency driver 1x 3" high frequency driver ◆ Nominal Impedance: 8Ω ◆ Rated Power Handling: 500W ◆ Frequency response Frequency Range (+/-3 dB):60 Hz-20 KHZ ◆ The radiation Angle Dispersion(-6 dB): H x V90°x 10° ◆ Sensitivity: 106dB ◆ Maximum SPL: 133dB ◆ Connection: 2x Speakon NL4 ◆ Speaker size (WxDxH) : 637x495x387mm ◆ Net weight N.W:27KG |
2 | 18 "subwoofer | CH-1218B |
◆ Frequency Response(-10 dB): 40Hz-1000Hz ◆ Sensitivity: 99dB ◆ Maximum SPL:127dB/peak133dB ◆ Driver: 1x 18" ◆ Nominal Impedance: 8Ω ◆ Power Handling: 600W ◆ Connection:2x Speakon NL4 ◆ Product dimensions:(WxDxH):637X600X542mm ◆ Net weight N.W: 32KG |
3 | 12 "back to listen | NM-12M |
◆ Impedance: 8Ω ◆ Frequency response: 65Hz-18.5KHz ◆ Sensitivity: 102dB/W/m ◆ Average power: 400W ◆ Frontal power: 1600W ◆ Size: mm(width 460 depth 300 height 460) ◆ Maximum sound pressure level :132dB ◆ Weight: 17kg ◆ Gross weight :19kg |
4 | Creel | A-120 | ◆Customized supporting hanger, with long and short connecting rod, 4 U buckle, 2 bandages |
5 | Linear array full frequency power amplifier | H800 |
◆ Stereo power: 8Ω850W*2,THD:0.05%1/8 ◆ Power 1KHz,4Ω1275W*2, 8ω ◆ Bridge power :2550W ◆ SNR: 105dB ◆ Frequency response: 20Hz-20KHz(±0.3dB) ◆ Input sensitivity: 0.775V ◆ Input impedance: 10K ohms-20K ohms ◆ The panel light: Signal, dctive, clip/limiting ◆ Power supply: 220V,50/60z ◆ Maximum power consumption: 3500W ◆ Net weight: 18.5kg ◆ Size: (D)450mm*(W)483mm*(H)88mm |
6 | Listen back amplifier | H800 |
◆ Stereo power: 8Ω850W*2,THD:0.05%1/8 ◆ Power 1KHz,4Ω1275W*2, 8ω ◆ Bridge power :2550W ◆ SNR: 105dB ◆ Frequency response: 20Hz-20KHz(±0.3dB) ◆ Input sensitivity: 0.775V ◆ Input impedance: 10K ohms-20K ohms ◆ The panel light: Signal, dctive, clip/limiting ◆ Power supply: 220V,50/60z ◆ Maximum power consumption: 3500W ◆ Net weight: 18.5kg ◆ Size: (D)450mm*(W)483mm*(H)88mm |
7 | Bass power amplifier | H1000 |
◆ Stereo power: 8Ω1000W*2,THD:0.01%1/8 ◆ Power 1KHz,4Ω1800W*2 ◆ Bridge power :3600W ◆ SNR: 108dB ◆ Frequency response: 20Hz-20KHz(±0.3dB) ◆ Input sensitivity: 0.775V/1V/1.55V ◆ Input impedance: 10K ohms-20K ohms ◆ The panel light: Signal, dctive, clip/limiting ◆ Power supply: 220V,50/60z ◆ Maximum power consumption: 5000W ◆ Net weight: 22.5kg ◆ Size: (D)450mm*(W)483mm*(H)88mm |
8 | Digital mixing console | MX16 |
◆ The 40-channel digital mixer for live sound reinforcement and recording studios has 32 built-in MIDAS classic speakers and 25 mixing busbars ◆ 32 input channels, 16 AUX outputs, 6 marshalling ◆ Supports AES50 networks, allowing up to 96 inputs and 96 outputs ◆ The shape of the mixer is designed by Bentley Automotive designers ◆ Made of high-performance carbon fiber and high-strength aluminum alloy ◆ 25 synchronous phase consistent mixing busbars ◆ 1 stereo AES/EBU output ◆ 1 Input and output to MIDI ◆ 36 user-defined keys ◆ 25 100mm MIDAS PRO electric faders ◆ 7 "TFT color" Daylight "display ◆ Support for Behringer's personal monitoring system P16 ◆ Support for U disk recording and playback in FAT32 format (up to 2 tracks at 44.1kHz sampling rate) ◆ Support DAW post-production routing control ◆ Built-in RTA function ◆ Support 32x32 channels of digital audio transmission via USB 2.0 ◆ Control digital audio workstations by using Mackie Control and Hui protocols control protocols ◆ It can be controlled wirelessly by the MIDAS Apps app in IPhone/IPad ◆ Size: 891*607*256MM 24.5KG |
9 | 4 in and 8 out audio processors | DX4008 |
Product features: ◆ DX series is a full digital audio processor, the appearance is simple and generous; ◆ USB, RS232 interface, network port and WIFI can be connected to the computer; Through PC control software to control, are very convenient and simple; ◆ Each input and output are equipped with 8 independent parameter equalization, adjustable gain range up to ±20dB; At the same time, the output channel balance can also choose Lo-shelf, Hi-shelf two skew wave mode; ◆ Mode each way has delay, polarity and mute Settings, delay up to 1000ms; ◆ Output channel, can also control the gain, voltage limit and input channel signal selection function; ◆ Variable high/low pass filter, and the response can be selected as Bessel, Butterworth 12dB,18dB,24dB or Linkwitz-Riley 12dB,18dB,24dB,48dB; ◆ Can store 12 groups of user programs. |
10 | Smart power manager | DF14 |
◆ Model L214 L214A ◆ Input power supply three-phase five-wire, AC 380 50Hz ◆ Power switch and overcurrent protection 32A 3P air switch with overcurrent and short circuit protection ◆ Number of channels The front panel has 1 direct channel ◆ Rear panel 14 way controllable (upper and lower two sockets for a group, a total of 7 groups, each channel control 1 group at the same time switch) ◆ Maximum output current of a single input The total current of the devices connected to the upper and lower sockets of a group is limited to 30A for 60 seconds or 16Arms ◆ Maximum input current 80A ◆ With power filters None, 7 16A special filters ◆ Package Size 557*462*145 mm |
11 | True diversity microphone | V10 |
◆ Diversity receiver for optimal reception ◆ Diversity receiver for optimal reception ◆ Wireless synchronization of the transmitter is realized by infrared frequency matching and manual frequency modulation ◆ Wireless receiving distance is adjustable, ◆ Frequency lockable control function button ◆ Unique intelligent ID identification technology to achieve multiple sets of simultaneous distribution ◆ With balanced and unbalanced audio output, easy to connect with various audio equipment ◆ The transmitter is powered by two 1.5V batteries for long battery life and easier maintenance ◆ The transmitter uses 50MHz bandwidth, which is convenient for interchanging frequency segments, especially during performances ◆ The transmitter is made of high-strength alloy material and durable ◆ Easy to read lighting LCD displayWireless synchronization of the transmitter is realized by infrared frequency matching and manual frequency modulation ◆ Wireless receiving distance is adjustable, ◆ Frequency lockable control function button ◆ Unique intelligent ID identification technology to achieve multiple sets of simultaneous distribution ◆ With balanced and unbalanced audio output, easy to connect with various audio equipment ◆ The transmitter is powered by two 1.5V batteries for long battery life and easier maintenance ◆ The transmitter uses 50MHz bandwidth, which is convenient for interchanging frequency segments, especially during performances ◆ The transmitter is made of high-strength alloy material and durable ◆ Easy to read lighting LCD display |
12 | Wireless microphone antenna amplifier | TX-870 |
Active antenna parameters: ◆ Operating frequency range :490-960MHz; ◆ Power supply mode: BNC,5-10VDC; ◆ Antenna type: logarithmic cycle; ◆ Input impedance: 50 ohms; ◆ Gain: 12dB; ◆ Directivity: horizontal 90°; ◆ Connector type: BNC; ◆ Gain: 12dB; ◆ Directivity: horizontal 90°; ◆ Connector type: BNC; |
13 | Cabinet | Custom |
- Previous: CH-110 Audio System
- Next: CH-208 Audio System